But we must continue to remember...
The ongoing trials and tribulations of a lowly stained glass store owner
Diary of a Demented Store Owner
Tuesday, 13 November 2012
Saturday, 10 November 2012
A Man Called Gus
While the glass business has been good to us, the real upside is the people you meet, and the lifelong friends you sometimes make. This is the story of one of those people.This is the story of Gus.
Twenty five years ago, I watched as this hulking, stern looking, Mike Mazursky look-a-like mountain of a man came into our store.
All weathered and gnarled, with a voice like he chewed gravel all day, he asked for an ashtray (yes, folks, it was that long ago- we all smoked and we did it wherever we felt like doing it). But I digress. He told me what he wanted, and with trembling hands I gave it to him.
His accent was thick. I asked him where he came from. We chatted, but just a bit. He eventually warmed up, as did I. We shared a few stories. I learnt that his sense of humour and ability to tease was unsurpassed.
I began to like him. I think maybe he tolerated me. I never caught his name as he left.
The next time he was in, I asked his name.
He said I should call him whatever I felt like. So I did.
"Gus it is" and for twenty five years he was known to us as Gus.
I met his wife and his daughters. I saw them grow up as we all grew old.
Gus and I both quit smoking. He, after losing half a lung. You see, he was so tough, he worked in a brickyard, with asbestos, smoked 2 packs a day, and quit at seventy.
I extended him credit, always keeping a scrap note that simply said 'Gus' on it. I didn't know his address or phone number, I just knew Gus was good for it.
I didn't see Gus for a few months.
Then Gus' wife came in to the store.
I feared why. I was right.
I'm not ashamed to say that a tear welled up in my eye. And again now as I'm writing this.
As it did to Pat and Zenia, because we all were there when Gus' wife looked at us with her tired eyes.
Gus' wife came to see if he had paid all his bills with me. She wanted to make sure his debts were all paid in this world.
It made us tear up again.
I'l miss Gus.
His name to everyone else?
Vladmir.
Thursday, 8 November 2012
Just In
More of the very exciting Spectrum Fuser's Reserve.
And remember, this stuff works just as well in your stained glass projects. The nice thing is that now we can bring them in in larger 24" x 24" pieces (all the better to hide the staff's faces with...
And remember, this stuff works just as well in your stained glass projects. The nice thing is that now we can bring them in in larger 24" x 24" pieces (all the better to hide the staff's faces with...
Tuesday, 6 November 2012
Bullseye Rodz (Rods)
Thanks to the hard work of FLB (Flowering Lotus Blossom), and her sidekick Nicholas Picholas, our massive Bullseye Glass Lampworking Rodz (Rods) Sale is now underway. Rodz are bundled, labeled and stored according to the Dewey Decimal System. Link to the Sales Page here, and link to our new customized on-line order form here.

On a separate note, Mikey was obviously cracking the whip as FLB also polished up our Spectrum 6" x 6" glass (for fusing, or not) shipped anywhere in Canada for a lousy $5 On-Line Order Form, making ordering so much easier. Go here for that one...
Makes me wonder sometimes about the youth of today...

On a separate note, Mikey was obviously cracking the whip as FLB also polished up our Spectrum 6" x 6" glass (for fusing, or not) shipped anywhere in Canada for a lousy $5 On-Line Order Form, making ordering so much easier. Go here for that one...
Makes me wonder sometimes about the youth of today...
Monday, 5 November 2012
Bullseye Rodz for Lampworking
... (and fusing).Dropping Bullseye as a supplier means we have literally a ton of Bullseye Rodz we'd like to share with the lamp working/ torchwork/fusing community.
Pricing is below Bullseye Glass factory direct (now the only place you can actually get their full line if you live in Canada), with huge discounts and savings also on books and oxygen concentrators!!
Don't believe us? Check this out here-
![]() |
| All pricing is for 1/2 lb quantities |
Saturday, 3 November 2012
The Why and What of Kerosene As A Cutter Lube
One of the things we get worked up about is all the misinformation about glass cutter lubricants. So much so that we feel compelled to rerun this blog entry;
It was a Canadian who discovered kerosene and invented the kerosene lamp. Dr. Abraham Gesner showed off his invention in 1846 on Prince Edward Island (how do you think he figured out where he was? He could finally see the map). He named it by putting the Greek word for wax, keros with the shape of his belly button, ene (not an oute).
Dad said you really never learn to swear until you learn to drive. That's not true- it's when cutting glass with the wrong lubricant. Yes folks, it's true- the type and the quality of lubrication is critical to successful glass cutting.
Now, a bit of a discussion as to why you want to use kerosene and nothing else as a cutter lube:
Glass is a strange material- it's not a solid, or a liquid, but a vitreous solution- something exhibiting traits of both and none of either- oh, never mind, just read FigHelper # 7 for an explanation, we must move on. The only thing you need to concern yourself with for the purpose of this discussion here is that the outside skin of glass is in a state of 'tension' (sort of like Mikey's home right now…), holding the middle in 'compression'.
When making a score with your glass cutter, the wheel only penetrates the surface of the glass by a mere 1/1000th of an inch (less than that in centimeters…helpful Ed), into the area of tension, but, at the same time it drives a crack well into the deeper compression layer. Using a lubricant will minimize excess surface fractures as your wheel rolls along the glass. A lubricant literally 'oils' the score line reducing surface damage, and as a bonus it reduces the tendency of the score to heal itself (that's Earnest Ainsley's job). The lubricant best suited to this job? Kerosene of course!
Now, while you might be a better person for understanding the principle behind making a score, you're not really any closer to finding out why we want you to use kerosene. After all, why put oil (which kerosene is) on glass that's already clean? This means we'll have to clean the glass before copper foiling people tend to whine.
Oh, the horror. Hey, if we analyze the purpose of a lubricant we could theoretically use any liquid (don't go there Ed). After all, it's the presence of a liquid that's important, not the type. Sounds kind of like Deja Moo- the feeling that you've heard this bull before.
But why kerosene? Let me illustrate the ways;
1) Well, most importantly it is a liquid.
2) It "facilitates the smoothest penetration of the glass surface, keeping microscopic chipping to a minimum" according to the experts.
3) It's cheap and widely available.
4) Its oil base protects cutters from corrosion unlike many of the synthetic cutter lubricants that make unscrupulous retailers lots of money
5) It evaporates almost totally, leaving little residue.
6) It is not sticky, and will not thicken in viscosity over time therefore it won't clog up the wetting wick in your cutter.
Let's expand a bit here and discuss the cutter wheel doing all the work. The angle to which the wheel edge is ground is the hone angle. This is an important factor in determining how well the wheel can have and then hold a sharp point. Getting it right with steel is very difficult, as steel does not allow itself to be well sharpened and then almost impossible to keep sharp. To compensate, manufacturers steepen the hone angle to compensate for steel's weakness. Stained glass cutters with steel wheels average 114- 120 degrees hone angle. The ubiquitous Toyo Supercutter's tungsten carbide wheel uses a wide (135 degree) hone angle with a very sharp point.
Now what does all this highly technical talk about hone angles have to do with cutting glass. Well, it seems that the difference in impact between a steel wheeled (steeper angle- blunt point) cutter and a tungsten carbide (shallow angle- sharp point) one is sort of like dancing with a 250 pound man in open toed (but with wool socks) sandals or with a woman wearing an off the shoulder chiffon red dress and matching stiletto heels. The pressure applied to the glass is directly proportional to the amount of wheel touching the surface of the glass. This is one of the reasons carbide wheels regularly outlast steel by 50-1.
That is all.
It was a Canadian who discovered kerosene and invented the kerosene lamp. Dr. Abraham Gesner showed off his invention in 1846 on Prince Edward Island (how do you think he figured out where he was? He could finally see the map). He named it by putting the Greek word for wax, keros with the shape of his belly button, ene (not an oute).Dad said you really never learn to swear until you learn to drive. That's not true- it's when cutting glass with the wrong lubricant. Yes folks, it's true- the type and the quality of lubrication is critical to successful glass cutting.
Now, a bit of a discussion as to why you want to use kerosene and nothing else as a cutter lube:
Glass is a strange material- it's not a solid, or a liquid, but a vitreous solution- something exhibiting traits of both and none of either- oh, never mind, just read FigHelper # 7 for an explanation, we must move on. The only thing you need to concern yourself with for the purpose of this discussion here is that the outside skin of glass is in a state of 'tension' (sort of like Mikey's home right now…), holding the middle in 'compression'.
When making a score with your glass cutter, the wheel only penetrates the surface of the glass by a mere 1/1000th of an inch (less than that in centimeters…helpful Ed), into the area of tension, but, at the same time it drives a crack well into the deeper compression layer. Using a lubricant will minimize excess surface fractures as your wheel rolls along the glass. A lubricant literally 'oils' the score line reducing surface damage, and as a bonus it reduces the tendency of the score to heal itself (that's Earnest Ainsley's job). The lubricant best suited to this job? Kerosene of course!
Now, while you might be a better person for understanding the principle behind making a score, you're not really any closer to finding out why we want you to use kerosene. After all, why put oil (which kerosene is) on glass that's already clean? This means we'll have to clean the glass before copper foiling people tend to whine.
Oh, the horror. Hey, if we analyze the purpose of a lubricant we could theoretically use any liquid (don't go there Ed). After all, it's the presence of a liquid that's important, not the type. Sounds kind of like Deja Moo- the feeling that you've heard this bull before.
But why kerosene? Let me illustrate the ways;
1) Well, most importantly it is a liquid.
2) It "facilitates the smoothest penetration of the glass surface, keeping microscopic chipping to a minimum" according to the experts.
3) It's cheap and widely available.
4) Its oil base protects cutters from corrosion unlike many of the synthetic cutter lubricants that make unscrupulous retailers lots of money
5) It evaporates almost totally, leaving little residue.
Let's expand a bit here and discuss the cutter wheel doing all the work. The angle to which the wheel edge is ground is the hone angle. This is an important factor in determining how well the wheel can have and then hold a sharp point. Getting it right with steel is very difficult, as steel does not allow itself to be well sharpened and then almost impossible to keep sharp. To compensate, manufacturers steepen the hone angle to compensate for steel's weakness. Stained glass cutters with steel wheels average 114- 120 degrees hone angle. The ubiquitous Toyo Supercutter's tungsten carbide wheel uses a wide (135 degree) hone angle with a very sharp point.
Now what does all this highly technical talk about hone angles have to do with cutting glass. Well, it seems that the difference in impact between a steel wheeled (steeper angle- blunt point) cutter and a tungsten carbide (shallow angle- sharp point) one is sort of like dancing with a 250 pound man in open toed (but with wool socks) sandals or with a woman wearing an off the shoulder chiffon red dress and matching stiletto heels. The pressure applied to the glass is directly proportional to the amount of wheel touching the surface of the glass. This is one of the reasons carbide wheels regularly outlast steel by 50-1.
That is all.
Friday, 2 November 2012
New Glass Colours
Looks like Spectrum has their mojo back. After sitting back for too long, they are finally getting back up to speed and increasingly adding new colours (oops, with some help from Uroboros too!).In the past year we've seen Celadon (green/grey), Persimmon (orangy brown), a Deep Chocolate Brown, Lemongrass, Terra Cotta, Black Cherry and now two really nice Opal Greys. Charcoal Opal is a rich, bold dark Grey that works well with strong colours- #280-76SF. and Pewter Opal is a lighter, mid-level Grey that compliments many of the warmer, subtle shades- #280-72SF.
A reminder of some of the stuff added fairly recently, here's some of the expanding opal line-






Fusers Reserve- a seemingly unlimited variety of one-of-a-kind colour mixes-
One of the most unusual and stunning line of glass- the Aventurines (3 choices)(check out the series of Seuss themed fused plates Zenia and Mike are working on-
Reactives (just ask us to explain this cool effect) and Collage-
And a gentle reminder of some of their other glass-Opalarts-
and Spirits-
And while all of this glass is Sys96 Glass specially formulated for fusing, remember, it is glass and is also suitable for all your stained glass projects as well!
Funny, we don't miss Bullseye at all...
Wednesday, 31 October 2012
November Monthly Sale Now Up
The end of the month is traditionally the time when we get to put something on sale, but more importantly it's also another opportunity to post an embarrassing picture of Zenia. Ah, but it's Halloween and one of our old employees, Anja dressed up so appropriately that Mikey is compelled to post her picture here instead, and to wish everyone a great Happy Halloween! Stay tuned for more Zenia next month.
Oh, yeah, go here for the Monthly Sale.
Monday, 29 October 2012
Coneart Kilns
![]() |
| Damn, Mikey found my bar! |
Frank, Mike and all the rest of the staff are simply too easy to get along with, are all very knowledgeable, and extremely accommodating and supportive whenever we call. They make a great kiln (six models specific to glass fusing- five of which we now carry in inventory)
The most important point to consider when buying a kiln is it's legality for sale in Ontario. We have the CSA Overlords assuring our electrical safety and we find people making unfair comparisons between Coneart which is CSA Approved and most competing brands which we've confirmed, aren't. Apples to apples...
![]() |
| Not only a great kiln, but great employees too! |
All Coneart kiln pricing includes The Whole Works- that means our pricing includes a stand, shelf, kiln posts, lid prop, kilnwash, an extensive Fusing Technical Kit with handouts and disc and even Mikey's private telephone number in case you forget how to program your kiln when we're closed.
Pricelist page as found here, although Vanna Opal thinks Mikey might be putting them on sale soon...
Sunday, 28 October 2012
Wow, Look Mom, Free Stuff!
We have a series of binders with well over 200 free patterns for you to choose from- including suncatchers, lamps and even Christmas themed stuff. And now we've added another binder of free projects and patterns devoted to fusing and slumping for your amusement (frustration?). Yours for the taking.
Don't have a kiln? Then come in and use ours (only $10/firing!), or rent one and take it home ($5/day!).
Don't have a kiln? Then come in and use ours (only $10/firing!), or rent one and take it home ($5/day!).
Wednesday, 24 October 2012
How Does He Do It?
All this choice, for a lousy 5 bucks shipped anywhere in Canada, and Mikey's not proud- he'll ship one piece or 400 for the same lousy 5 bucks!
Monday, 22 October 2012
Mikey Explain Our Social Media in the First person
This whole social media thing might be getting a little out of hand today with so many different ways to interact, but it seems that as a business owner, to remain relevant and vital you must participate in most of them.
Not as easy at it might seem.
Oh, sure, we are computer savvy and have no problems setting up and administering the various accounts. We even are reasonably good spellers, occasionally use alliteration and are somewhat competent to write content, post pics, etc. But there is a certain etiquette that occasionally eludes us- after all, we are digital immigrants and today's social media followers are all digital natives- yes, we are possibly just as smart, but not as 'with it'- perhaps that's why we find ourselves making a living at a 1200 year old craft. And this all came blatantly obvious to me yesterday, when my over exuberance for the new medium Instagram was blatantly pointed out to me by said natives as perhaps as being, shall we say, a bit over exuberant?!
And rightfully so.
You see, I got excited by the opportunities these new avenues offer, to share, promote and educate those who might wish to follow us and the happenings at Fantasy In Glass. I have been duly humbled and made well aware that at times, even Mikey might be a little out of step. Hey, just lost the mullet a short while ago- some things just take a bit more time...
Now, this gives me an opportunity to share with you our logic on our use of various other social media.
Firstly, Blogger- I have been writing a Diary for well over 15 years- firstly, prior to our website's existence as an email newsletter, then as a formal section on our website, and now today as a blog started back in 2006 that now numbers almost 1200 entries. It currently approaches 2.5 million visits since started and is the first place for the newest news, and has entries added on average once every three days or so. This has always been our primary choice to disseminate information and will remain so into the future.
And then we've also been on Twitter (@fantasyinglass) for awhile. It has been low key, as we sort of just feel it out- we do post some amazing sales here that you won't hear about anywhere else.
And of course, we've had our own channel on YouTube.
Logos below will link you directly to those spots-
Logos below will link you directly to those spots-
... and for iPhone and Android smartphone users, we are on Instagram- under Figimodo Fantasyinglass-
Correction
Last month, The Fig Blog known as the Diary of a Demented Store Owner, mistakenly reported that a sudden and completely unpredictable auto accident had crippled Ferrous Man Joe Dinardo, and that an investigatory probe had found the Bambini Bros. completely blameless in the accident. In actuality, these events will take place next week. The Diary regrets the error. This however does give us the opportunity to remind you of all our free patterns found here...
Vanna Opal Inadvertently Does Some Good
I just knew that if I gave Vanna Opal a few sale squares to clean that of course she'd shrink them like she does to all of my clothes. Hey, another bright idea!Actually since we came up with the idea of the 6" x 6" Sale Square it's been crazily successful. There are well over 200 colours to choose from- solid opals, cathedrals, streakies, Opalarts, Spirits and the new Fuser's Reserves, from both Spectrum and Uroboros Glass.
Yes, I know, it's all Sys96 Glass, a line that people use primarily for fusing but actually, glass is just glass- any glass can be used for your stained glass projects (it's just the other way around that doesn't work- not all glass can be used for fusing).
If you want a nice, vibrant solid red opal for example, you will only find it in the fusible racks, and you'll pay over $30/ft for it. But what if you only need a small piece (costing $6-$) that's where these sale squares show their true value.
And yes, it is true- Mikey will ship them anywhere in Canada for a lousy $5, whether you want 12 pc or 200!
Saturday, 20 October 2012
Secret To New Glass Pattern Found, Then Lost
Three staff members at Swiss Cheesed GlassWerks have claimed to have unlocked the secret to a new art glass which contains both squares and stars in a random pattern, then just as quickly lost the secret due to 'just trying to do too many things at once.'Gary Brownie, chief researcher of the Swiss Cheesed's Really Pretty Colours Department said he and his colleagues found the formula to this long sought after colour pattern, "but then just lost it, although we knew it was there, and we just had it."
Brownie added "It was so bizarre. I was just looking at our test firings and complaining about how the squares were more like parallelograms and having been fed up with the staff's persistent insistence with coming up with some sort of splotchy "Fremont Antique Glass type look with streaky striped edges on the sheet" and I guess I put this beautifully perfect squared and starred piece down and couldn't find where I put it. I spent all afternoon looking everywhere, even in the drawer with all those discarded polarizing lenses and old 'Approximately System 95 or Thereabouts' stickers. I have no idea how we find anything here. Anyway, I just couldn't find it."
Head of the Really Pretty Colours Research Department, David Chase suggested Brownie look in his lab coat when he finds it just in case he was going to put it there. Commenting on Brownie's well known absent-mindedness, Mr. Chase related the one time Brownie was looking all over the lab for his stressometers, and discovered he was wearing them on his head. It was so funny. Chase is still "sure it's somewhere. I mean, where else could it be?"
Everyone was careful to think about where they went after making the discovery, hoping to retrace their steps, although doing so usually resulted in them tripping and bumping into each other. Brownie added " I really worry about telling my boss that we lost it. We misplaced a formula for an extra dark white just earlier this month. He won't be too happy."
Head of the Really Pretty Colours Research Department, David Chase suggested Brownie look in his lab coat when he finds it just in case he was going to put it there. Commenting on Brownie's well known absent-mindedness, Mr. Chase related the one time Brownie was looking all over the lab for his stressometers, and discovered he was wearing them on his head. It was so funny. Chase is still "sure it's somewhere. I mean, where else could it be?"
Everyone was careful to think about where they went after making the discovery, hoping to retrace their steps, although doing so usually resulted in them tripping and bumping into each other. Brownie added " I really worry about telling my boss that we lost it. We misplaced a formula for an extra dark white just earlier this month. He won't be too happy."
Friday, 19 October 2012
Introduction to Fusing Seminar Tomorrow!
Thinking about utilizing those artistic/technical skills you've developed over the years for the betterment of mankind? Or maybe something else if you're Dr. Evil?
How about considering our Intro Seminar on Fusing being run tomorrow?
Same tools, same skills (or lack of), take the day (10-4) and learn how to fuse and make a whole bunch of stuff!
No need to preregister- just show up.
Taught by 'I'm Not From Barcelona Louie'- see here for more info...
Thursday, 11 October 2012
Help!?
We got this note from Spectrum last week explaining something or other about their clear glass for fusing, but for the life of me, we can't figure it out!
So rather than trying to be clever, or accidentally misinform, we thought to just reprint it here verbatim and hopefully someone out there will be able to make some sense of it (apparently, even Mikey's Enigma Machine couldn't decode it).
Here goes:
One of our biggest challenges over the past few years has been to find solutions that keep the prices of our products down in the face of continually rising costs of raw materials. Such is now the case with our core System 96® Clear product, 100SFS. In light of the fact that we must increase the price of 100SFS Clear, we developed a new Clear fusible formula -- "Icicle Clear" (100SF-ICE) -- that we are pleased to be able to offer at an even lower price point than you've been paying for 100SFS.
Named for it's slightly bluish hue, Icicle Clear fusible is made using the same exacting standards as all System 96 products -- the same devit-resistance and tested compatibility that fusers trust world-wide. We expect the ever-so slight blue hue of the new Icicle Clear fusible to be a non-issue for the majority of fusers using Clear as a project base, or clear cap.
Those who prefer the classic 100SFS glass will be impacted by the price increase (note new price code shift below). For those customers who require completely neutral Clear glass for their work, we will continue to offer our premium Crystal Clear (100SFXTL) products, without any change in price.
Icicle Clear will now be our regularly stocked, primary Clear fusible glass, and as such is likely to pick up where 100SFS left off as our new lowest priced, standard Clear SF product. The good news is that 3mm Icicle Clear will actually cost about 5% less than you are currently paying for 3mm 100SFS!
As noted in the chart above, all Irid Clear will now be made using the new Icicle Clear fusible formula. Irid Clear in the traditional SFS formula will be available as a special order item only (minimums will apply).
Tuesday, 9 October 2012
Improve Your Cutting
It's late at night.
The scotch is all gone.
Mikey's in bed in his Puppy themed flannel pyjamas. Who you gonna call when you're in trouble with your cutting skills? Consider going here, and reviewing this pdf file on '12 Ways to Improve Your Cutting'. That way Mikey can get a good night's sleep...
And don't get caught cutting and texting, it's the law!
The scotch is all gone.
Mikey's in bed in his Puppy themed flannel pyjamas. Who you gonna call when you're in trouble with your cutting skills? Consider going here, and reviewing this pdf file on '12 Ways to Improve Your Cutting'. That way Mikey can get a good night's sleep...
And don't get caught cutting and texting, it's the law!
Friday, 5 October 2012
A Dozen Things You Need to Know to Drill Holes In Glass
A very common problem people have is how to properly drill holes in glass.
Tripped across this page while surfing the net the other day which you might find helpful.
Just go here...
And why not give Aanraku a plug- they make a great 1/8" hollow diamond drill bit that costs less than $20 for two and we've got a whole bunch in stock!
Tripped across this page while surfing the net the other day which you might find helpful.
Just go here...
And why not give Aanraku a plug- they make a great 1/8" hollow diamond drill bit that costs less than $20 for two and we've got a whole bunch in stock!
Tuesday, 2 October 2012
Everything Is Going Green!
Because glass contains oxides and is made from incredibly varying formulae, it is almost unrecyclable. While small pieces can be useful (heck, we sell all our scrap and donate the proceeds to charity) there is a certain amount that has little use. But if you check out this link, you might find more use for your scraps.
Monday, 1 October 2012
October Sales Up
... which means we get to post another totally unflattering pic of Zenia as is our monthly ritual.
Go here for the Sales Page...
Go here for the Sales Page...
Subscribe to:
Posts (Atom)


































